Cities: Skylines

Cities: Skylines

569 ratings
Highways over Wall Complete Collection
4
2
5
6
6
4
2
3
2
   
Award
Favorite
Favorited
Unfavorite
Description
This Collection contains all my highways over concrete wall. These Highways will allow you to trace two carriageways at the same time, one for each direction. In addition, the elevated section trace a supporting wall that will follow the curvature of the road.


New version 4:

- Automatic horizontal signs on intersection nodes and on height level passage (see description below)
- New Model for Bridges with separated cariageways
- Slightly reduced the width of the lanes for best alignment with new element of this collection
- Cars now are visible in tunnels
- Redo all meshes from scratch for align graphic to new lanes dimension
- New pieces to create realistic acceleration / deceleration lanes on one side or both
- New pieces to create realistic acceleration / deceleration lanes on OneWay Highways
- Added pre-made SPUI Junction by Mooks to collection.

is highly recommended the use of the Loading Screen Mod. This collection is optimized for this mod, with same textures shared by all the elements of every roads. This allows a good reduction of amount of Ram used from my Highways.

https://steamcommunity.com/sharedfiles/filedetails/?id=667342976

---------------------------
In this v4, All elements have been designed to perfectly align with each other. This allows you to create passages between highways with a different number of lanes or intersection with realistic In/out lanes in a simple and very smooth way. And for the purpose of intersections, 2 kinds of pieces are available with Io / Out lanes, on both sides or just one:



The Traffic Divider will be present in the intersections with the ramps, but will be removed in those with city streets or where the traffic light is present:



---------------------------
Road Markings

In nodes, road markings are draw automatically both in intersections and in the passages between height levels:



But for some CSL limits, it is not always possible. In these cases you can take advantage of the excellent Intersection Marking Tool Mod for complete them.

https://steamcommunity.com/sharedfiles/filedetails/?id=2140418403


---------------------------

Ramps

there are 3 versions of the ramp. The difference that distinguishes them, is a different setting of the Minimum Corner Offset parameter. It further rounds the junction with the other roads, allowing for more realistic entrances and exits.



If you need, for example if you using the normal OneWay highways as ramp, you can alter this parameter of all noned as you want with this useful mod during play:

https://steamcommunity.com/sharedfiles/filedetails/?id=2085403475

---------------------------

In this collection you will also find a series of accessories:

Barriers: Decorative element that allows to complete the treaffic divider in the intersections with the asymmetrical ones or in forks created with one-way versions. There are 4 versions of these barriers:
- Double Guardrail
- Single Guard Rail
- Solid and Striped Lines: Decorative element that allows to complete the Horizontal Signs in the intersections These lines have the same color, size and spacing as those already present on the highways, making it impossible to be distinguishable

All these element are traceable like roads. No props are used.

---------------------------

Combining all these elements together and with the help of some other suggested mods (see below), you will be able to create realistic highway exits and entrances, with deceleration or acceleration lanes complete of accurate horizontal signs:

[i.postimg.cc]

[i.postimg.cc]

[i.postimg.cc]

[i.postimg.cc]

[i.postimg.cc]

[i.postimg.cc]

[i.postimg.cc]

[i.postimg.cc]

You also can find a Pre-Made SPUI junction by Mooks

[scontent-mxp1-1.xx.fbcdn.net]

---------------------------

Suggested Mod

- Fine Road Tool 2 to be able to force the construction of the bridge segment for, as exaple, the creation of doors in the wall and passing through with other roads.

- Move It to better align all elements, for optimal aesthetic.

- Fine Road Anarchy 2 Very useful in some cases

- TM:PE - Traffic Manager President Edition: To prevent cars from turning in the intersection with traffic barrier visible, thanks to his lanes connector.

- Network Skin 2 to be able to change the color of the asphalt and some other details to your liking
Items (31)
Highways over Wall - 1+1 Lanes with Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 1 lane. The carriageways are separated by a double Guardrail Barrier, and a single guardrail is traced in both side. The elevated section trac...
Highways over Wall - 1+1 with Asymmetrical I/O Lane
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 1 lane but on one side there is an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quick...
Highways over Wall - 1+1 with I/O Lanes on both side and Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 1 lane and an additional acceleration/deceleration lane, which will allow you to build realistic exits and entrances quickly. The carriageways...
Highway over Wall - 2+2 with Center Guardail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 2 lane. The carriageways are separated by a double Guardrail Barrier, and a single guardrail is traced in both side. The elevated section trac...
Highways over Wall - 2+2 with Asymmetrical I/O Lane
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 2 lane but on one side there is an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quick...
Highways over Wall - 2+2 with I/O Lanes on both side and Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 2 lane and an additional acceleration/deceleration lane, which will allow you to build realistic exits and entrances quickly. The carriageways...
Highways over Wall - 3+3 Lanes with Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 3 lane. The carriageways are separated by a double Guardrail Barrier, and a single guardrail is traced in both side. The elevated section trac...
Highways over Wall - 3+3 with Asymmetrical I/O Lane
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 3 lane but on one side there is an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quick...
Highways over Wall - 3+3 with I/O Lanes on both side and Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 3 lane and an additional acceleration/deceleration lane, which will allow you to build realistic exits and entrances quickly. The carriageways...
Highways over Wall - 4+4 Lanes with Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 4 lane. The carriageways are separated by a double Guardrail Barrier, and a single guardrail is traced in both side. The elevated section trac...
Highways over Wall - 4+4 with Asymmmetrical I/O Lane
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 4 lane but on one side there is an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quick...
Highways over Wall - 4+4 with I/O Lanes on both side and Center Guardrail Barrier
Created by SimoG
This Highway will allow you to trace two carriageways at the same time, one for each direction.
Each of them has 4 lane and an additional acceleration/deceleration lane, which will allow you to build realistic exits and entrances quickly. The carriageways...
Highways over Wall - Ramp with Min. Corner Offset 0
Created by SimoG
This is the ramp for my Highways over Wall. A single guardrail is traced in both side and the elevated section trace a supporting wall that will follow the curvature of the road. This version, have the Minimum Corner Offset set to 0 (see below for more inf...
Highways over Wall - Ramp Without Emergency Lane
Created by SimoG
This is the ramp for my Highways over Wall. A single guardrail is traced in both side and the elevated section trace a supporting wall that will follow the curvature of the road. This version, have the Minimum Corner Offset set to 0 (see below for more inf...
Highways over Wall - Ramp with Min. Corner Offset 30
Created by SimoG
This is the Ramp for enter and extit from Highways over Concrete Wall. The elevated section trace a supporting wall that will follow the curvature of the road.

Other features: Custom Tunnel Entrances and Rendered Tunnels.

This Ramp have the Minimum C...
Highways over Wall - Ramp with Min. Corner Offset 50
Created by SimoG
This is the Ramp for enter and extit from Highways over Concrete Wall. The elevated section trace a supporting wall that will follow the curvature of the road.

Other features: Custom Tunnel Entrances and Rendered Tunnels.

This Ramp have the Minimum C...
Highways over Wall - 1 lane OneWay with I/O Lane
Created by SimoG
This Highway will allow you to trace a 1 lanes oneway with aan additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quickly. It's also used as a end of a ramp with a turn lane. A single guardrail is traced i...
Highways over Wall - 2 Lanes OneWay
Created by SimoG
This Highway will allow you to trace a 2 lanes oneway with a supporting wall that will follow the curvature of the road.

Other features: Custom Tunnel Entrances and Rendered Tunnels.

I suggest the use of mods:

- Fine Road Tool 2 to be able to forc...
Highways over Wall - 2 lane OneWay with I/O Lane
Created by SimoG
This Highway will allow you to trace a 2 lanes oneway with an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quickly. It's also used as a end of a ramp with a turn lane. A single guardrail is traced in...
Highways over Wall - 3 Lanes Oneway
Created by SimoG
This Highway will allow you to trace a 3 lanes oneway with a supporting wall that will follow the curvature of the road.

Other features: Custom Tunnel Entrances and Rendered Tunnels.

I suggest the use of mods:

- Fine Road Tool 2 to be able to forc...
Highways over Wall - 3 lane OneWay with I/O Lane
Created by SimoG
This Highway will allow you to trace a 3 lanes oneway with an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quickly. It's also used as a end of a ramp with a turn lane. A single guardrail is traced in...
Highways over Wall - 4 Lanes Oneway
Created by SimoG
This Highway will allow you to trace a 4 lanes oneway with a supporting wall that will follow the curvature of the road.

Other features: Custom Tunnel Entrances and Rendered Tunnels.

I suggest the use of mods:

- Fine Road Tool 2 to be able to forc...
Highways over Wall - 4 lane OneWay with I/O Lane
Created by SimoG
This Highway will allow you to trace a 4 lanes oneway with an additional acceleration/deceleration lane,which will allow you to build realistic exits and entrances quickly. It's also used as a end of a ramp with a turn lane. A single guardrail is traced in...
Highway over Wall - Double Barrier Only
Created by SimoG
This is a traceable double concrete Barrier for complete the traffic divider in the intersection with Asymmetrical segments....
Highway over Wall - Single Guardrail Only
Created by SimoG
This is a traceable single guardrail for complete the traffic divider in the intersection with oneway version of my highways over concrete wall....
Highways over Concrete Wall - Solid line for decoration
Created by SimoG
This is a traceable solid line that match perfectly the color and dimension of the horizontal sign of my highways over wall. You can trace this for complete the horizontal signs in the intersections....
Highways over Concrete Wall - Striped line for decoration
Created by SimoG
This is a traceable striped line that match perfectly the color and dimension of the horizontal sign of my highways over wall. You can trace this for complete the horizontal signs in the intersections....
Highways over Wall - Pylon Pack
Created by SimoG
Pylon Pack for SimoG's Highways over Concrete Wall

-6 versions for cover various widths of my Highways....
Highways over Wall - SPUI
Created by Mooks
Highways over Wall - SPUI by Mooks

What is SPUI?

Short answer: Best service interchange for Cities Skylines

Long answer: A single-point urban interchange (SPUI, /ˈspuːiː/ or /ˈspjuːiː/), also called a single-point interchange (SPI)[1] or single-p...
Highways over Wall - Placeholder Street lamp
Created by SimoG
This is a placeholder. Its purpose is to fool the Mod Network Skin 2 and allow you to changed them on my highways.

for now they are not yet operational but will be with the next version of my highways....
National Road over Wall - Road Delineator
Created by SimoG
This is a simple prop of a Road Delineator for my National Road over Wall (not released yet)....
In 1 collection by SimoG
Simog - Radena
739 items