weiner npc
Jamarious Quangadangle III   Cocos (Keeling) Islands
 
 
HOW TO SAFELY OPERATE A CO2 FIRE EXTINGUISHER

PULL... Pull the pin. This will also break the tamper seal.

AIM... Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire.

NOTE: Do not touch the plastic discharge horn on CO2 extinguishers, it gets very cold and may damage skin.

SQUEEZE... Squeeze the handle to release the extinguishing agent.

SWEEP... Sweep from side to side at the base of the fire until it appears to be out. Watch the area. If the fire re-ignites, repeat steps 2 - 4.
Currently Offline
Safely using a drill press
Set the Speed.
The speed on most drill presses is adjusted by moving the drive belt from one pulley to another. In general, the smaller the pulley on the chuck axis, the faster it spins. A rule of thumb, as with any cutting operation, is that slower speeds are better for drilling metal, faster speeds for wood. Again, consult your manual for the manufacturer’s recommendations.

Fit the Bit.
Open the chuck, slide in the bit, snug the chuck by hand around the bit’s shaft, then tighten the chuck’s three jaws with the key. Make sure to remove the chuck. If you don’t, it’ll become a dangerous projectile when you turn on the drill. When drilling large holes, drill a smaller, pilot hole first.

Adjust the Table.
Some models have a crank that adjusts the table height, others move freely once the clamping lever has been released. Set the table to the desired height for the operation you are to perform.

Gauging the Depth.
If you are simply drilling a hole in a piece of stock, you may not need to adjust the depth gauge, the threaded rod that controls the distance the spin­dle travels. However, if you are concerned with a stopped hole of a fixed depth, lower the bit to the desired height, and ad­just the pair of knurled nuts on the depth gauge to the proper stopping point. One of them should stop the spindle; the other locks the first nut in place.

Secure the Workpiece.
Before operating your drill press, be sure that the workpiece to be drilled is fixed in place. The ro­tation of the drill bit may try to spin the wood or metal workpiece, so it must be clamped to the worktable, braced against the supporting column at the rear of the machine, or other­wise secured. Never operate the tool without firmly anchoring the workpiece.

Drilling.
Once the drill press setup has been completed, put­ting it to work is easy. Make sure the drill is spinning at full speed, then present the bit to the workpiece, lowering the bit by swinging the rotating lever. Once you’ve finished drilling the hole, release the pressure on the lever and its spring-loaded return mechanism will return it to its original position.

Recent Activity

0.5 hrs on record
last played on Jul 31
1.0 hrs on record
last played on Jul 27
451 hrs on record
last played on Jul 24
DUCK Dec 30, 2021 @ 3:47am 
oGHH
conVars.com Dec 24, 2021 @ 8:04am 
+rep cat lover
Big Black Clock Dec 12, 2021 @ 4:58pm 
hey, sorry i saw your profile and i just thought you looked cute in your picture. i really wanted to tell you that)) It's really rare to see girls playing video games haha! I don't know why it's a guy thing honestly im like really against misogyny and like ill be the one in the kitchen making sandwiches. We should really play l4d2 sometime its a really cool zombie game with a lot of scary moments, but don't worry ill be there to protect you ;) sorry that wasnt flirtring i swear im just trying to be friendly i really like your profile picture sorry was that too far? Really sorry i'm really shy i don't go out much haha add me on skype we should talk you look really nice and fun
April Dec 9, 2021 @ 10:19am 
gay ass
April Sep 9, 2021 @ 11:20am 
-rep so we was in a csgo lobby and he joins my team just to shout racial slurs at me. He adds me and follows me into other lobbies calling he the Hard R and other words DO NOT PLAY WITH HIM
DUCK Jul 28, 2021 @ 3:41pm 
hey, sorry i saw your profile and i just thought you looked cute in your picture. i really wanted to tell you that)) It's really rare to see girls playing video games haha! I don't know why it's a guy thing honestly im like really against misogyny and like ill be the one in the kitchen making sandwiches. We should really play l4d2 sometime its a really cool zombie game with a lot of scary moments, but don't worry ill be there to protect you ;) sorry that wasnt flirtring i swear im just trying to be friendly i really like your profile picture sorry was that too far? Really sorry i'm really shy i don't go out much haha add me on skype we should talk you look really nice and fun