erik.scheveneels 2013년 10월 10일 오전 7시 50분
PC won't recognize Hori Real Arcade Pro V3 SA KAI
So recently I bought an Hori Real Arcade Pro V3 SA KAI stick for playing SFIV AE on my PC. When I plug it in it my PC recognizes the device and the XBOX switch burns green for 1 second. Then windows 7 starts installing a driver called "RAP.NX". After a while i get a problem that windows can't find the device driver. I've tried everthing (updating drivers, installing latest version of XBCD, Xpadder...). None of them work because windows just doesn't recognize the stick. Googling doens't work either because there almost no topic about this. Even when I google "RAP.NX" I get zero results. Can somebody help cause I think the only option is bringing the stick back to the retailer and hope that I get my money back.
< >
1-99개 댓글 표시
erik.scheveneels 2013년 10월 10일 오전 9시 38분 
Nope, nothing works. Just won't detect...
oni911b 2015년 1월 12일 오후 1시 54분 
I know I am necroing, but this problem gave me so much trouble, when i have found solution so simple that i am feeling stupid i did not figured it out sooner. So to anyone with same or similar problem stumbling on this post:

1. In device manager locate RAP.NX (it will have exclamation mark on its icon)
2. Right click and select update driver software
3. In update driver dialog select "Browse my computer for driver software"
4. Select "Let me pick from a list of device drivers on my computer"
5. Choose Microsoft controller class
6. Choose xbox 360 controller 2009
Windows will be kicking and screaming telling it is not compatible and might cause problems, tell it to continue.

In rare case windows might not have 360 controller driver pack, I made windows update to get those drivers just by plugging in standard 360 controller. Probably Microsoft is keeping those drivers somewhere as normal download, but i could not be arsed to look for them.

Tested it for HRAP V3 and VX on Windows 7 64bit and Windows 8.1.

This solution should work for most controllers for xbox360 (name of the unknown device will change).
"Most" is because when i was looking for solution i have found information on issues with some older MadCatz sticks caused by motherboard chipset incompatibility, I could not test this.
oni911b님이 먼저 게시:
I know I am necroing, but this problem gave me so much trouble, when i have found solution so simple that i am feeling stupid i did not figured it out sooner. So to anyone with same or similar problem stumbling on this post:

1. In device manager locate RAP.NX (it will have exclamation mark on its icon)
2. Right click and select update driver software
3. In update driver dialog select "Browse my computer for driver software"
4. Select "Let me pick from a list of device drivers on my computer"
5. Choose Microsoft controller class
6. Choose xbox 360 controller 2009
Windows will be kicking and screaming telling it is not compatible and might cause problems, tell it to continue.

In rare case windows might not have 360 controller driver pack, I made windows update to get those drivers just by plugging in standard 360 controller. Probably Microsoft is keeping those drivers somewhere as normal download, but i could not be arsed to look for them.

Tested it for HRAP V3 and VX on Windows 7 64bit and Windows 8.1.

This solution should work for most controllers for xbox360 (name of the unknown device will change).
"Most" is because when i was looking for solution i have found information on issues with some older MadCatz sticks caused by motherboard chipset incompatibility, I could not test this.

This worked for me, thanks.
WarmedxMints 2016년 2월 3일 오전 3시 42분 
A number of aftermarket Xbox One controllers don't like the PC drivers. I just use a cronusmax myself - www.cronusmax.com. It takes the input and changes it to an official 360/XB1/PS3/PS4 output. You can choose which.

I also use it so my Dualshock 4 controller is seen as a 360 controller by windows, that way it works with games which only support a 360 controller.
Bad 💀 Motha 2016년 2월 3일 오전 3시 47분 
WarmedxMints님이 먼저 게시:
A number of aftermarket Xbox One controllers don't like the PC drivers. I just use a cronusmax myself - www.cronusmax.com. It takes the input and changes it to an official 360/XB1/PS3/PS4 output. You can choose which.

I also use it so my Dualshock 4 controller is seen as a 360 controller by windows, that way it works with games which only support a 360 controller.

Yupp, works wonders, especially since Windows PC does not like Playstation controller types. Or might not fully support off-brand controllers in general.
Bad 💀 Motha님이 마지막으로 수정; 2016년 2월 3일 오전 3시 48분
WarmedxMints 2016년 2월 3일 오전 4시 07분 
Bad-Motha님이 먼저 게시:
Yupp, works wonders, especially since Windows PC does not like Playstation controller types. Or might not fully support off-brand controllers in general.

Yeah, it's an amazing little device isn't it? I was unsure when I first bought one but I can't imagine gaming without it now. I've picked one up for every computer and console I have now just because I am too lazy to move one around :p
WarmedxMints님이 마지막으로 수정; 2016년 2월 3일 오전 4시 07분
Mordecai Walfish 2016년 4월 9일 오전 12시 15분 
oni911b님이 먼저 게시:
I know I am necroing, but this problem gave me so much trouble, when i have found solution so simple that i am feeling stupid i did not figured it out sooner. So to anyone with same or similar problem stumbling on this post:

1. In device manager locate RAP.NX (it will have exclamation mark on its icon)
2. Right click and select update driver software
3. In update driver dialog select "Browse my computer for driver software"
4. Select "Let me pick from a list of device drivers on my computer"
5. Choose Microsoft controller class
6. Choose xbox 360 controller 2009
Windows will be kicking and screaming telling it is not compatible and might cause problems, tell it to continue.

In rare case windows might not have 360 controller driver pack, I made windows update to get those drivers just by plugging in standard 360 controller. Probably Microsoft is keeping those drivers somewhere as normal download, but i could not be arsed to look for them.

Tested it for HRAP V3 and VX on Windows 7 64bit and Windows 8.1.

This solution should work for most controllers for xbox360 (name of the unknown device will change).
"Most" is because when i was looking for solution i have found information on issues with some older MadCatz sticks caused by motherboard chipset incompatibility, I could not test this.

This worked for me.

Thank you.
TheRightKnight 2018년 6월 8일 오전 8시 29분 
oni911b님이 먼저 게시:
I know I am necroing, but this problem gave me so much trouble, when i have found solution so simple that i am feeling stupid i did not figured it out sooner. So to anyone with same or similar problem stumbling on this post:

1. In device manager locate RAP.NX (it will have exclamation mark on its icon)
2. Right click and select update driver software
3. In update driver dialog select "Browse my computer for driver software"
4. Select "Let me pick from a list of device drivers on my computer"
5. Choose Microsoft controller class
6. Choose xbox 360 controller 2009
Windows will be kicking and screaming telling it is not compatible and might cause problems, tell it to continue.

In rare case windows might not have 360 controller driver pack, I made windows update to get those drivers just by plugging in standard 360 controller. Probably Microsoft is keeping those drivers somewhere as normal download, but i could not be arsed to look for them.

Tested it for HRAP V3 and VX on Windows 7 64bit and Windows 8.1.

This solution should work for most controllers for xbox360 (name of the unknown device will change).
"Most" is because when i was looking for solution i have found information on issues with some older MadCatz sticks caused by motherboard chipset incompatibility, I could not test this.


I can't ♥♥♥♥ing believe that this post is 3 years old and it was still the only thing that helped me out today after 4 hours of trying to find drivers for this thing.
I wish nothing but happiness and good will upon you and your bloodline oni911b
< >
1-99개 댓글 표시
페이지당 표시 개수: 15 30 50

게시된 날짜: 2013년 10월 10일 오전 7시 50분
게시글: 9