Steamをインストール
ログイン
|
言語
简体中文(簡体字中国語)
繁體中文(繁体字中国語)
한국어 (韓国語)
ไทย (タイ語)
български (ブルガリア語)
Čeština(チェコ語)
Dansk (デンマーク語)
Deutsch (ドイツ語)
English (英語)
Español - España (スペイン語 - スペイン)
Español - Latinoamérica (スペイン語 - ラテンアメリカ)
Ελληνικά (ギリシャ語)
Français (フランス語)
Italiano (イタリア語)
Bahasa Indonesia(インドネシア語)
Magyar(ハンガリー語)
Nederlands (オランダ語)
Norsk (ノルウェー語)
Polski (ポーランド語)
Português(ポルトガル語-ポルトガル)
Português - Brasil (ポルトガル語 - ブラジル)
Română(ルーマニア語)
Русский (ロシア語)
Suomi (フィンランド語)
Svenska (スウェーデン語)
Türkçe (トルコ語)
Tiếng Việt (ベトナム語)
Українська (ウクライナ語)
翻訳の問題を報告
Even if it starts to throttle you really won't notice unless you doing benchmarks or something.
EDIT: From my drives specs
https://semiconductor.samsung.com/consumer-storage/internal-ssd/980pro/
OPERATING TEMPERATURE
0 - 70 ℃
Right now all of my Nvme drives are at <30c with the exception of my OS drive that is at 36c. I have heatsinks on all of them only so I don't need to replace the motherboards thermal pads for its in built heatsinks when I remove them. I also have good cooling/air flow but again if they were to hit 70 I really wouldn't notice the throttling anyway.
I do have 3 industrial fans in each computer though.
If that's under load, it's okay.
What drive(s)? With what drive cooling, if any? What case with what case cooling?
My two NVMe drives (SN850X) run at ~50C (OS) and ~55C (secondary). They use the motherboard heatsinks and the secondary drive has a smaller one. This is much warmer than all the SATA SSD/HDDs I had/have which initially had me investigate, as those idled around 30C and peaked around 45C. Some drives will just run warm, and some people will have systems that put them near the higher end of typical. As long as the drives aren't throttling, and nobody can give you the temperature this happens at without knowing your exact drive, then nothing is wrong.
Idle especially doesn't mean a whole lot. Peak temperature is what matters. A lot of people tend to have opinions about what temperatures certain things should run at based on what they feel they want, or based on what their other things of that hardware type tend to run at. This method will be ignoring that things like CPUs and NVMe SSDs in particular are on a serious upward trend with temperatures.
So I'd instead look into typical ranges others are seeing for your specific drives (reviews and/or anecdote from other users), and then find out its maximum rated temperature, and use that to establish a baseline. You may find you're more on the higher end of the typical range but there is no exact point you "should" be at so it's fine if you're within spec.