A new update for the free OMSI 2 Add-on VanHool Generationen Series is available now!

Check the entire changelog below:

• Addition of static models for each variants : (OMSI 2\Sceneryobjects\Static_Vehicles_VH_GR)
• Addition of factory matrix displays for each models of the A(G)300's (Lines codes : 80 -> 91)
• Fixed minors bugs on A(G)300's
• Modification of the behavior of the reverse gear selector (the safety button must also be pressed below to the left of the steering wheel).
• Modification of blinkers : The "cui-cui" sounds will no longer play in warning mode.
• Fixed some sounds changing from mono to stereo.
• Fixed a bug for the lights of the A120/60 on AI.
• Fixed a bug of the STIL Liege of the AG280/1.
• Removed "servopump" noise.
• Added the ability to allow passengers to enter through all doors.

A new OMSI 2 Tools - AUXI Expansion Update is available now!

Version 1-10
------------
Overhauled HUD:
- Extra HUD item for 'passenger count'
- Extra HUD detail in 'next stop name' for 'distance to next stop in meters'
- Extra HUD item for 'fuel remaining %
- Optionally skip bus stops under certain conditions
- Change TTS announcer voice to another compatible voice
- TTS announcer can also announce when the bus is arriving at the next bus stop
- Extra HUD item for 'bus stop relative heading'
- Extra HUD item for 'outside temperature'

See manual for more details

Fixes
- Fixed an issue where an incorrect file name would be shown in the LUA console after loading an LUA script for the first time
- Fixed an issue with validating the latitude and longitude values of the real weather settings
- Fixed a potential conflict with Track IR
- Fixed an incompatibility with a DLC where the bus stop request HUD item wasn't flashing when it should
- Fixed an issue where the driver cameras were still being handled by AUXI even though AUXI was closed
- Fixed an issue with languages where when macros were involved sometimes the macros would get stuck
- Various other miscellaneous fixes

Others
- Spanish translations
- Manual V 1.1 ENG / V1.1 DE


Version 1-20
------------
- Discord rich presence
Show to other Discord users what you're doing in OMSI. The name of the bus you're driving, the map you're driving on, the next bus stop time and name, passenger count and more.
- Driver seat adjustment settings are now unique to each bus
You can now adjust the position depending on the bus you're driving and only have that specific configuration for that specific bus.
- Hide all visible HUD items with a single menu item
For example if you're taking a screenshot you can hide all of AUXI's currently shown HUD items temporarily (note: this won't also hide AUXI's main UI).
- HUD items can now be locked
This means that they won't be able to take any focus from mouse clicks or mouse hovers while locked.
They will still show on the screen but can't be interacted with (except for Next Bus Stop as it has a button to skip bus stops).
- HUD items automatically lock if mouse control is enabled in OMSI
This means that HUD items won't potentially disrupt those using a mouse to drive in OMSI.
- Driver statistics entries are now capped at 250
Older entries will be deleted first if this cap is exceeded, a cap exists in the interest of maintaining an acceptable performance when viewing your driver statistics.
- Code modernisation, much of the code has undergone some tidying and modernisation work
- Showing or hiding HUD items will no longer also close the HUD submenu each time
- Changed autosave timer in AUXI from every 60 seconds to every 20 seconds
- Time synchronisation no longer shows the date and instead only the time
- HUD items no longer show on ALT+TAB (task switching)
- Reliable version detection of OMSI has been implemented. Only OMSI version 2.2.032 is supported!
- Updated translations
- Dropped Steamworks.NET as it's no longer required or used by AUXI
- Various bugs fixed
- Manual V 1.2 ENG / V1.2 DE


Version 1-30
------------
- AI scheduler
- Added column for controlling maximum number of cars
- Added column for controlling maximum number of humans
- Added column for controlling the globals.cfg traffic multiplier
- Added column for controlling the globals.cfg humans multiplier
- Added ability to load and save presets
- Bus colour scheme [NEW]
- Change the repaint of the bus almost instantly without needing to respawn the bus again
- Cruise control [NEW]
- Give your foot a rest on a long motorway/highway and enable cruise control to automatically control the throttle and maintain the current speed
- Note: This may not work well with buses that have a manual gearbox
- Note: Tapping the brakes more than 5% will deactivate cruise control
- Driver Seat
- Lean forward with an assignable hotkey, handy at junctions where you can't quite see the view you'd like. The amount you lean forward is also customisable per bus
- Zoom hold with an assignable hotkey. The amount you zoom is also customisable per bus
- Added head tilt setting per bus (up/down)
- Added lean forward customisable setting
- Added zoom hold customisable setting
- Hotkeys [NEW]
- Added more than two dozen customisable hotkeys for managing various AUXI features and OMSI 2
- HUD
- Added brake bar HUD item
- Added cruise control HUD item
- Added gear number HUD item
- Added throttle bar HUD item
- Changed style of HUD items which have a progress bar
- Weather
- Added seasonal dynamic weather modes
- Spring
- Summer
- Autumn
- Winter
- Dynamic weather modes now enforce the season on any map, applying the appropriate textures for that season (changes to this setting don’t take effect while a map is currently loaded)
- Changes in weather are even more gradual and are based on the update interval. For example, if the update interval is 10 minutes then when a weather update is fetched the weather will gradually change over the next 10 minutes from the current weather to the recently fetched weather
- Weather no longer needs to disabled in AUXI in order to change the mode
- Added some OMSI script variables for managing some features in AUXI, please see the manual for more details
- Configuration file has been overhauled to simplify implementing new settings in the future, sadly this means your current configuration will be reset to default settings. The new configuration file is now located in the AUXI folder and is created when AUXI is first started
- Fixed various bugs
- Updated translations
- Manual ver 1.3 ENG / ver 1.3 DE


Version 1-31
------------
- AI Scheduler's logic has been rewritten from scratch, this will also hopefully address an issue where there might have been an increase in passengers since version 1.3
- Dynamic weather may now appear to be a little less biased and ideally more random
- Time synchronisation's logic has been rewritten mostly from scratch
- Cruise control is a little more aggressive at maintaining the current speed
- Bus repaint number input field is no longer limited to values between -255 and 255
- Some bug fixes
- Possible performance improvement


Version 1-311
-------------
- Fixing long loading times for certain maps


Version 1-312
-------------
- Increased the thread priority for handling the driver's camera
- Fixed an issue with inconsistent numerical format in AUXI's bus camera configuration files (originally depending on region of the PC)
- Fixed an issue where AUXI didn't ignore commented cameras in an OMSI 2 bus file
- Restored some LUA script files for Developer Tools which were missing in the previous version


Version 1-40
------------
- Added feature to modify Discord Rich Presence 'details' message (default: "%map_name% | %vehicle_name%")
- Added macro %map_name% for Discord Rich Presence messages
- Added macro %vehicle_name% for Discord Rich Presence messages
- Added feature to enable or disable OMSI logging to its file
- Added feature to change bus stop distance radius to a value between 5 meters and 60 meters (default: 60 meters, which is OMSI 2’s default range)
- Disabled auto time sync by default
- Updating the documentation