Steam for Linux

Steam for Linux

De CodeerHeer 2013년 12월 4일 오전 9시 56분
Could not find required OpenGL entry point 'glColorMaskIndexedEXT'
I get this error when trying to run Garry's Mod. Now garry's mod can be run of Windows XP, but because Arch is faster I want it on linux. The embedded videocard is supported so how can I fix or bypass this error?

My laptop: EEEPC 901 < Upgraded with 2GB Ram and 64GB HDD

Already Thanks!
~Darrell
De CodeerHeer 님이 마지막으로 수정; 2013년 12월 4일 오전 10시 22분
< >
8개 댓글 중 1-8개 표시
Yolo San 2013년 12월 4일 오전 11시 22분 
Hello.

What GPU do you have? What drivers are you using for the GPU?

You can find the answers for these questions using:
sudo lspci -Qv

You will get blocks of detailed information of all your PCI devices.
Look for a line containing "VGA compatible controller" and paste here its contents, along with the lines following it(the whole block).

It will look similar to this:
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 760] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device 360b Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Memory at e8000000 (64-bit, prefetchable) [size=128M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] [virtual] Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] #19 Kernel driver in use: nvidia Kernel modules: nouveau, nvidia
Letalis Sonus 2013년 12월 4일 오후 12시 34분 
Forget it, the OpenGL support of your ancient Intel GMA is WAY too low and the OpenGL requirements of the Source engine's D3D wrapper are WAY too high.
De CodeerHeer 2013년 12월 4일 오후 1시 58분 
On windows it was working correctly and smooth
so there must be a way... I'll post the specs asap
Letalis Sonus 2013년 12월 5일 오전 8시 37분 
The Source engine uses a D3D wrapper to be able to use OpenGL on other platforms. For some reason that wrapper requires OpenGL 3. The Intel GPU used for the 901 is already quite ancient, you don't even have OpenGL 2 support available, only OpenGL 1.4.

No, there is absolutely no way to get it running, you can only use Wine instead.
De CodeerHeer 2013년 12월 5일 오전 8시 41분 
Okay, I will use one then. Thanks anyway!
Mitsos2012 2014년 2월 23일 오전 3시 18분 
01:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce 7600 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0630
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at dc00 [size=128]
[virtual] Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Kernel driver in use: nvidia



Can i run it?? :missing:
Fibbs 2014년 2월 23일 오후 8시 51분 
Sorry but Source games on Linux (such as Garry's Mod,) require at least OpenGL 2.1 support. The first nVidia cards to include this were the Geforce 8000 series.
Fibbs 님이 마지막으로 수정; 2014년 2월 23일 오후 8시 53분
Mitsos2012 2014년 2월 24일 오전 5시 30분 
damn it :P:physgun:
< >
8개 댓글 중 1-8개 표시
페이지당 표시 개수: 1530 50

게시된 날짜: 2013년 12월 4일 오전 9시 56분
게시글: 8