安裝 Steam
登入
|
語言
簡體中文
日本語(日文)
한국어(韓文)
ไทย(泰文)
Български(保加利亞文)
Čeština(捷克文)
Dansk(丹麥文)
Deutsch(德文)
English(英文)
Español - España(西班牙文 - 西班牙)
Español - Latinoamérica(西班牙文 - 拉丁美洲)
Ελληνικά(希臘文)
Français(法文)
Italiano(義大利文)
Bahasa Indonesia(印尼語)
Magyar(匈牙利文)
Nederlands(荷蘭文)
Norsk(挪威文)
Polski(波蘭文)
Português(葡萄牙文 - 葡萄牙)
Português - Brasil(葡萄牙文 - 巴西)
Română(羅馬尼亞文)
Русский(俄文)
Suomi(芬蘭文)
Svenska(瑞典文)
Türkçe(土耳其文)
tiếng Việt(越南文)
Українська(烏克蘭文)
回報翻譯問題
Thanks for reply.
But after i fully close the game everything went back to normal.
Can you run a continuous ping from a pc to the server you ran the speedtest on in command prompt. Type:
ping -t ip
See if there are wild differences in response time before and after you start the game.
Are you using your own modem or the ISP modem? Is it a modem or an all-in-one? If it's an all-in-one, do you have it configured for pass-thru mode?
If it's in pass-thru mode already, I believe your ISP may have some kind of accidental throttle in place on the backend.
Most unlikely but possible, if you have an all-in-one behind your ROG that is not configured for pass-thru, you may have a double NAT going on which can cause weird issues.
Also, can you replicate this problem with any other situations besides Elden Ring?
1.Are you using your own modem or the ISP modem? Is it a modem or an all-in-one? If it's an all-in-one, do you have it configured for pass-thru mode?
I live downstairs so my brothers have modem and his router upstairs
I connect my router to his router that's how i get internet.
This could cause this kinda of problems?
I did done Elden Rings Steam version port forwarding to my WAN IP from his router.
2.Also, can you replicate this problem with any other situations besides Elden Ring?
Nope
Thank you for reply and help @Zark
Oh i forgot about ping test!
Im going to try it right now.
i'll try to ping my router and gateway IP first see if response time dramatically increase if so then it should be something on my end.
Will let you know and keep you update in 10 mins.
Additionally, sometimes the cable can cause this issue. Your adapter is auto negotiating to 10mbps. You can try to force your adapter to do 1gbps and see what happens. On the pc right click your ethernet adapater, properties, configure, advanced, speed & duplex, and select 1.0 Gbps Full Duplex.
What happens if both your PC and PS4 at on WiFi (5Ghz preferable), instead of Ethernet cable?
Ping test results while in game and running speed test.
It didnt spikes at all.
https://imgur.com/AzkWrzF
192.168.1.1 is my brothers upstairs routers IP
192.168.1.1 is my routers IP
8.8.8.8 Google DNS IP
53ms to Gooogles DNS is normal here because im in State of Hawaii. :(
I didnt use auto negotiating i double checked today its set it to 1.0 Gbps Full Duplex.
spend like 3 hours trying to do everything i can but nothing works :(
But if i close game right now everything is back to normal.
i tried too bro!
same thing even under Wi-Fi 5Ghz when game is running my download and upload speed affects by something i dont really know...
Yes
1.My brothers router connected to modem
2.My router connected to his router.
3.DHCP is on but i do not know if my router is in WAP mode or not. How do you find that out?
Can you spell WAP in full sorry English is not my native language.
IP Address: 192.168.1.250
Subnet: 255.255.255.0
Gateway 192.168.1.1
Log in to it at the new 250 address. Put it into Access Point mode. Not sure where it's at, maybe in the administration area.
Double NAT occurs when you connect your router to an ISP gateway or another router. Because NAT is performed by each router or gateway, your network is split into two different private networks. The devices connected to one private network might have communication problems with the devices connected to the other private network, and you might experience problems with:
Online games
VPN connections
Port forwarding and triggering
Secure websites that use SSL
So there is few option in Router Mode section
1.Wireless router mode / AiMesh Router mode (Default)
2.Access Point(AP) mode / AiMesh Router in AP mode
3.Repeater mode
4.Media Bridge
5.AiMesh Node
Right now my router is set to 1.Wireless router mode / AiMesh Router mode (Default)