Team Fortress 2 > Virtual Reality > トピックの詳細
k701 2013年3月19日 13時52分
No Razer Hydra and Oculus Rift at the same time?
Reading the wiki it doesn't mention the Hydra as one of the controller options. Did you just miss that, or is the Hydra not Supported while in VR mode? If not, do you plan to support it? Thanks.
1-15 / 29 のコメントを表示
< >
LockeDown 2013年3月20日 13時47分 
*bump*
Lucky Luciano (禁止済) 2013年3月21日 5時47分 
*bump*
T_K_16 2013年3月21日 11時42分 
There are only five threads here now. There's no need to bump yet.
‏‏ 2013年3月26日 12時52分 
Don't worry, Oculus VR and Sixense are teaming up:


http://www.oculusrift.com/viewtopic.php?f=2&t=1592
k701 2013年3月29日 15時14分 
Got my Rift and trying to use +sixense_enabled 1 turns off the warping and just makes the image into SBS that doesnt work on the Rift. So right now you can't use both at the same time :(
Programmer Joe 2013年3月30日 8時32分 
Thanks for trying that, k701. I will track down a Hydra and figure out what's going on.
‏‏ 2013年3月30日 8時45分 
Basketball demonstration of Oculus Rift + Razer Hydra (@ 6 min.):

http://www.youtube.com/watch?v=07IwxUD8N8E&hd=1#t=6m0s
最近の変更は‏‏が行いました; 2013年3月30日 8時46分
k701 2013年3月30日 10時11分 
Programmer Joe の投稿を引用:
Thanks for trying that, k701. I will track down a Hydra and figure out what's going on.

Thank you so much!
Programmer Joe 2013年4月1日 16時06分 
What is the full command line you are using, k701? Is it "-vr +sixense_enabled 1"?

Try this instead: "-vr oculus +sixense_enabled 1"

It looks like it still doesn't actually work, but the distortion shader is definitely still running.
k701 2013年4月1日 16時46分 
Yes, I was using "-vr +sixense_enabled 1" as a launch command

Using either "-vr oculus +sixense_enabled 1" as a launch command, or just "-vr" as a launch command, and then "+sixense_enabled 1" once ingame I can get the warping to work correctly.

But now the reticle does not match the actual point where you are shooting, using both the Rift and the Hydra at the same time.
Programmer Joe 2013年4月1日 19時21分 
I have a fix for the mismatched reticle. It will ship later this week in the next TF2 update.

sixense_enabled is an archive convar, so if you set it once in the console it will be saved in your config and you don't need to set it again. So no need to keep it on your command line.

Once you get the fix, you might try playing with the vr_moveaim_reticle_yaw_limit convar. The value that works with the mouse doesn't seem exactly like the value you will want when you are using the Hydra.
k701 2013年4月1日 20時01分 
Thank you!
:::$!r::: 2013年4月1日 22時49分 
it is awesome
kreafan 2013年4月3日 7時40分 
If the Virtuix Omni is attached to both these devices, it would be more strange (in good meaning) experience (look at one direction, move at another, shoot at the 3rd).
http://www.youtube.com/watch?v=AmukXVHW6F4
KrylonShadow 2013年4月3日 8時55分 
Programmer Joe の投稿を引用:
I have a fix for the mismatched reticle. It will ship later this week in the next TF2 update.

sixense_enabled is an archive convar, so if you set it once in the console it will be saved in your config and you don't need to set it again. So no need to keep it on your command line.

Once you get the fix, you might try playing with the vr_moveaim_reticle_yaw_limit convar. The value that works with the mouse doesn't seem exactly like the value you will want when you are using the Hydra.
Can you try to give us complete freedom of control as well? What I am referring to is, while using the Hydra I would like to look around with my head, aim the gun/crosshair with my right wand, use WASD with the left analog stick, and "turn" with my right analog stick, ALL independently. The exception of course is that turning with the right analog stick should make my whole view change including what my head is looking at. This kind of functionality is restricted when using just the Hydra in TF2, which I found to be incredibly dissatisfying because your current implementation using only the "freelook" style is not very desirable.
1-15 / 29 のコメントを表示
< >
ページ毎: 15 30 50
投稿日: 2013年3月19日 13時52分
投稿数: 29