Psychonauts > Algemene discussies > Details van topic
\[T]/ 16 nov 2013 om 8:51nm
FIXED Xbox controller Issue!
I've seen many complaints about the xbox controller not working (especially the wireless ones), and this fix may apply to you. Many computers have a default gamepad called "HID Compliant game controller" or a "6 direction 24 button hat switch". The problem is the game recognizing the HID controller (which is really nothing, its just always on in some pcs.) as controller 1, and the Xbox one as Controller 2. So...

1. Go to Devices and Printers
2. Right click on HID-Compliant game controller (or whatever the unused controller is)
3. Click Properties
4. Go to the Hardware tab, and click on the HID-compliant game controller. Click properties in the bottom right.
5. Click on the Drivers tab.
6. Click "Disable"

Thats it! Now, any game you play, including Psychonauts, will detect your Xbox controller consistently. This solves the controller issue in many other games too! I hope this helps.

Also, a very simple patch to change the on-screen buttons, to that of the Xbox controller, for easier gameplay. (instead of wondering what to do when it says to press 'e'"

http://dl.dropbox.com/u/75754626/PsychoPadLite_v1.1_install.rar
1-15 van 26 reacties weergegeven
< >
aquarius0 17 nov 2013 om 3:07vm 
Thanks!
\[T]/ 17 nov 2013 om 6:33vm 
np!
Psiklops 20 nov 2013 om 5:42nm 
I was excited to try this, but unfortunately Psychonauts still doesn't work with my xbox controller. :-(

For the record, I had no HId-compliant game controller listed until I turned on the xbox controller, so maybe I have a different problem.
\[T]/ 20 nov 2013 om 5:46nm 
make sure you have the right drivers downloaded, you can get them off of Microsofts site. Check drivers, then make sure your controller is on BEFORE the game is booted up, or it wont recognize it. Lastly, once your xbox controller is on, it should show up in your Devices and Printers as "Xbox 360 Controller", and the HID Complaint one should be seperate. It sounds to me like your pc thinks the xbox controller is just a standard pc controller, making me think your dirvers arent there. but idk lol. Let me know if that works for you.
Psiklops 21 nov 2013 om 5:38nm 
Thanks for the suggestions, but no luck. I downloaded the drivers again to be sure and it told me I had the correct drivers already installed. I always turn on the controller before launching a game. BTW, the HID compliant game controller doesn't show in "Devices and Printers" for me, though it does show up in device manager under the HID section. (win7x64)

I bet you're right about the detection being the problem. I've had the controller not work on a couple of other things, though it is fine for most.
Psiklops 21 nov 2013 om 5:45nm 
I figured out the problem. I have a Belkin n52te keyboard/controller attached and Psychonauts is using that instead of the xbox controller. Now if I can figure out a way to make it stop doing that. unplugging it didn't work.
\[T]/ 21 nov 2013 om 6:19nm 
Ok, go into your devices and printers, and right click the xbox controller. Go to Game Controller settings, and you should be able to click "Advanced" and set different priorities. And, did you disable the HID compliant controller from within the device manager?
Laatst bewerkt door \[T]/; 21 nov 2013 om 6:20nm
\[T]/ 21 nov 2013 om 6:21nm 
Like, itll give you choices. "When xbox controller is plugged in, use (x) device"
Make sure its set to your controller, not the keyboard.
BakeACake 21 nov 2013 om 11:02nm 
Thanks for this, patch worked! Now I can actually press buttons in menus without fearing what they'll do.
Psiklops 22 nov 2013 om 1:15nm 
Yeah, I already had the xbox controller set as the preferred device and the HID compliant controller disabled but Psychonauts still uses the n52te. I tried disablig the virtual HID devices too (that is how the belkin controller is listed), but no dice. At least I know what the problem is now; maybe I'll have a brainstorm one day and figure out how to get it working.
\[T]/ 22 nov 2013 om 1:55nm 
Youre welcome, Bake a Cake! And, one last thought... did you try setting the belkin device, to "prefer" the xbox controller? Just go in game controller settings on the Belkin, and click advanced and set preferred device to the xbox controller. If that doesnt work, then Im all out of ideas. Sorry man.
Psiklops 23 nov 2013 om 8:31nm 
You can't set a preferred device for each device, but rather for the device category. So, for "game controllers" I can set either the xbox controller or the virtual Hid device as preferred.

I'm thinking that perhaps windows just enumerates usb devices as they're found and if I can find a way to switch the order then maybe things will work the way I want. I also thought about uninstalling the device and reinstalling but just haven't been that motivated yet.
TheSunshyn 22 dec 2013 om 7:27nm 
Thanks for the inforrmation. I'm on Win7 and seemed to have the same problem with my Nostromo gamepad as Psiklops did. I had the option to set the Nostromo or x360 to preferred. However, after I disabled the HID compliant controller the option to set the preferred device to the x360 controller goes away. The game still won't see the xbox controller.

BTW, it never shows up in devices and printers as "Xbox 360 Controller", just "Controller" which contained Xbox 360 Controller and USB Input Device (had HID compliant controller listed in the same box until after I disabled it and restarted.
\[T]/ 22 dec 2013 om 7:30nm 
if it only shows as "Controller", it sounds to me like you need the right drivers. But im not sure. Try Microsofts website, and downloads the latest drivers. See if that helps anything.
1-15 van 26 reacties weergegeven
< >
Per pagina: 15 30 50