Qc-PsyKoStorm Sep 8, 2013 @ 3:43pm
Thanks
I use this program since 4-5 years. I was disapointed when I bought 2 EVGA 680 to play game in surround when to find out that Nvidia surround did not work.

But now the problem is solved and it work very good.

Two things I would like to see in the next update is:
When you use a resolution with bezel corection, the possibility to create a zone under the bezel where the wallpaper cannot be. (I would not loose half a picture under the bezel.)

A fix for the multi taskbar to be ajusted with the bezel correction. (Because when using mutl taskbar, one per screen with bezel corection, I loose the start menu under the bezel.)

Thanks for the software and sorry for my english ;)
Showing 1-14 of 14 comments
< >
Keith Lammers (Binary Fortress)  [developer] Sep 13, 2013 @ 7:01am 
Glad to hear it! Compensating for the bezel compensation will be very tricky, but it's on our list, so we'll be sure to let you know if we're able to make it work.

And your English is great, no worries at all :)
Keith Lammers (Binary Fortress)  [developer] Nov 5 @ 6:52pm 
Ok! DisplayFusion 7.0 Beta 6 is available, and we've added support for asymmetrical splits, and bezel corrected resolutions. In the Monitor Configuration window, hit the "Splits and Padding" button, and you'll get the window with all the configuration options for the splits. Here are some basic steps for bezel corrected resolutions to get you started:
  • Assuming you have three monitors, use the "Preset Splits" button to select the 3x1 option.
  • Click the "Show Preview" button.
  • Select each split, and set the "Width" and "Height" values to the actual resolution of your monitor (not the bezel corrected resolution).
  • Select the middle split, and using the "Left" box in the Location group, increase the value until you see the white line on the left side of the middle monitor.
  • Select the right split, and using the "Left" box in the Location group, increase the value until you see the white line on the left side of the middle monitor.
  • Verify that all three monitors have a white line on all four sides, then click OK, and OK again.

When you've had a chance to test it out, please let us know how it goes! We're looking for any feedback on functionality, as well as usability :)

Thanks!
Qc-PsyKoStorm Nov 6 @ 6:27pm 
Very easy to use, took me 10 minutes to understand, would take me 1 minute to change the setting if i need. (Now that I know the basic)

The show preview button is very nice and help alot to get the job done.

With all the option, I can do almost anything. (Crazy)

The wallpaper, taskbar, opened folder, etc. are perfectly ajusted.

I could do a monitor with different size of wallpaper with perfect fit

==============================================================
#1

Problems I found so far.

When I activate the screen saver 1 screen saver per monitor(3), with or witouth required password after screensaver option, the 3 taskbar start to move at the bottom of my screens and cannot stay in place. It switch position between a wellplaced taskbar and a taskbar right on top of of it.

5-10 minutes have passed without touching anything. 2/3 taskbar are now well placed. My middle screen taskbar is stuck 1cm over the place it should be.

I hope it help find what cause this.

I opened Nvidia control panel, The middle taskbar is now back to the good place.
The problem occur each time i start the screen saver.

After a computer restart, it asked me to stop process of nvidia setting that could interfer with display fusion. I did and this problem is fixed.

================================================================
#2

Found a little bug, with no real impact: (only a visual glitch)
1: you take a window
2: you drag it in one screen and maximize the window
3: you close it.
4: you open it again.

What i expect:
It shoul open directly in the same monitor in a maximized view,

What i get:
It open in all 3 monitor (full triple screen extended) and then (aproximatly 0,2 sec later) shrink to the right position.

================================================================
#3

Little bug but very anoying :P:

When I open the start menu of my middle monitor, it apear on the left monitor.
If I move the middle task bar and place it at the same place, the problem is fixed for 1 click. Then it open in the wrong monitor again.

SAme thing happen if i click anywhere in the middle monitor taskbar and open the start menu 1-2 time, it open at the right place and after it start opening in the left monitor.

One thing i noticed: when it stop working as intended, the start menu icon is stuck in a positionlike it's already clicked.

It appear the menu is opening as if it was a triplescreen taskbar and display fusion have difficulty to keep the taskbar confined in the middle monitor.

The problem is not present if I place the taskbar on the side of the monitor.

Maybe related to the same problem.
One other thing i notice: I need to click 1 time to open the start menu, I time to reset the, and 1 time to close it. (Sometime more click are needed to close the menu and sometime it work fine) (it's not a mouse problem :P)




Last edited by Qc-PsyKoStorm; Nov 8 @ 3:29pm
Keith Lammers (Binary Fortress)  [developer] Nov 12 @ 7:04am 
Thanks for the feedback! #2 is the expected behaviour. We can't really intercept the window before it gets created, so we have to wait until after, then constrain it to the split.

For #3, which version of Windows are you running?
Qc-PsyKoStorm Nov 12 @ 8:55am 
Windows 7 professionnel 64 bit
Keith Lammers (Binary Fortress)  [developer] Nov 14 @ 1:17pm 
Ok, the next time that issue occurs, can you check the Windows Task Manager > Processes tab, and see if the following two processes are running?

DisplayFusionHookAppWIN6032.exe
DisplayFusionHookAppWIN6064.exe
Qc-PsyKoStorm Nov 14 @ 3:06pm 
I activated the multiple diplay taskbar again. The middle monitor taskbar is now in the left monitor over the left monitor taskbar all the way over the right monitor taskbar. I dont have a start menu in my middle screen. I tryed restarting my pc. It change nothing. Maybe if I reinstal Display fusion it will fix the problem?

DisplayFusion.exe is running
DisplayFusionHookAppWIN6032.exe *32 is running

I dont have DisplayFusionHookAppWIN6064.exe
Last edited by Qc-PsyKoStorm; Nov 14 @ 3:06pm
Qc-PsyKoStorm Nov 15 @ 6:51pm 
Aa other bug, but maybe its a problem with my instalation.

Strange, the folder window stoped being only maximized in one monitor. It now maximize in all 3 monitor.


Google Chrome wiindow is working normaly and I can drag it t o be maximized in any monitor.


If you think it's related to a problem with the instalation of the patch, I can uninstal the program and intall it again to see if this fix the problems.
Keith Lammers (Binary Fortress)  [developer] Nov 18 @ 10:20am 
This issue will actually be all fixed up in the next beta. Both of the problems you were running into are related to the DisplayFusionHookAppWIN6064.exe process not starting up correctly. On the DisplayFusion Settings > Options tab, you can enable beta update checks, and then you'll get notified as soon as it's available :)
Last edited by Keith Lammers (Binary Fortress); Nov 18 @ 10:21am
Qc-PsyKoStorm Nov 18 @ 1:27pm 
I will test again when it's released and give you feeedback.
Keith Lammers (Binary Fortress)  [developer] Nov 19 @ 6:24pm 
We've just posted it, so if you haven't received the update notification already, you can just hit the Check for Updates button on the Settings > Options tab.

Thanks!
Qc-PsyKoStorm Nov 20 @ 3:41am 
Beta 8

DisplayFusionHookAppWIN6032.exe
DisplayFusionHookAppWIN6064.exe

Both files are running.

The Middle Taskbar is now in the middle monitor like it should.

The problem #3 remain.
If you need I can send you some photo to explain the problem . Or a video (Maybe Fraps can record the desktop, never tryed.)
Last edited by Qc-PsyKoStorm; Nov 20 @ 3:42am
Keith Lammers (Binary Fortress)  [developer] Nov 20 @ 8:32am 
Ok, great! Screenshots or a video would definitely be helpful :)
Qc-PsyKoStorm Nov 20 @ 3:21pm 
Here is a video. I learned how to post a video on steam :P
dont like to hear myself in english. Not enough practice HeHe.
Maybe the glitch was in previous version as well, but I was not using Multitaskbar before the Bezel correction add on.

http://steamcommunity.com/sharedfiles/filedetails/?id=344516442
Last edited by Qc-PsyKoStorm; Nov 20 @ 4:04pm
Showing 1-14 of 14 comments
< >
Per page: 15 30 50