Antichamber > Общие обсуждения > Подробности темы
Gameshrk90 4 фев, 2013 @ 22:31
Crashing at the puzzle where the solution is to make a box that self fills with cubes.
It's the room with the cube that has to be filled in. When I make the box it fills and then freezes. Is there a workaround or patch?
Показано 19 из 9 комментариев
< >
Turn_on_a_Dime 5 фев, 2013 @ 0:13 
The dev has said that he will fix it but it will take time and testing.

For the time being, you can try an alternative solution (pulling the blocks), or try to fill it in small bits at a time, so you are not crashing it by suddenly making one big cube.
Jamsauce 5 фев, 2013 @ 1:48 
I was Getting same issue as well, The last time i tried i just looked away from the box as it filled in and it didn't crash for me.
justice 5 фев, 2013 @ 2:26 
If its the room Im thinking of, you can make a slightly smaller cube that doesnt crash the game if you angle the first block a littel further inwards.
Gameshrk90 7 фев, 2013 @ 16:33 
Thanks everyone
Zorlond 7 фев, 2013 @ 19:40 
Thanks to the alt solution above (thanks, btw), I managed to get to the x-ray room behind it. And found out this...

http://cloud.steampowered.com/ugc/903239780138303006/7594FB78CF12A93CC8D42BBA2C306DF042D13F3F/

http://cloud-2.steampowered.com/ugc/903239780138303491/8B60F17C429174049FB430293AD795A3F00D9D6B/

Yikes. Unless you make it perfect the very first try (and not always even then), and don't create extra bits hanging off here and there, it's internal structure is a total mess. That's a small cube I made, as big as I could safely do without crashing. Imagine that scaled up by the cube law of mathematics.
Zorlond 7 фев, 2013 @ 19:48 
Oh, and BTW, an addition to the Alternate Solution video: If you point straight down and single-click three times, then do a middle-left combo to make a platform, you'll be at just the right height to easily pop cubes in through the holes.
DerfK 8 фев, 2013 @ 21:12 
As an alternate-alternate solution, I used the yellow gun to drag diagonal lines of blocks from the top of one side of the cube to the bottom of the other edge, cutting through the lasers in the middle. It took a lot longer than the alternate solution in the video, though
Durandal 12 апр, 2013 @ 10:55 
Just solved this by stacking 5-6 blocks on the outside to get a view into the whole box through the 2 upper holes that can be fired through, and from 2 angles on each side I was able to fire in and cover every laser. Could have done it with the blue gun.
Показано 19 из 9 комментариев
< >
На страницу: 15 30 50
Дата создания: 4 фев, 2013 @ 22:31
Сообщений: 9