Antichamber

Antichamber

Antichamber > 일반 토론 > 제목 정보
Gameshrk90 2013년 2월 4일 오후 10시 31분
Crashing at the puzzle where the solution is to make a box that self fills with cubes.
It's the room with the cube that has to be filled in. When I make the box it fills and then freezes. Is there a workaround or patch?
< >
1-99개 댓글 표시
Turn_on_a_Dime 2013년 2월 5일 오전 12시 13분 
The dev has said that he will fix it but it will take time and testing.

For the time being, you can try an alternative solution (pulling the blocks), or try to fill it in small bits at a time, so you are not crashing it by suddenly making one big cube.
Jamsauce 2013년 2월 5일 오전 1시 48분 
I was Getting same issue as well, The last time i tried i just looked away from the box as it filled in and it didn't crash for me.
justice 2013년 2월 5일 오전 2시 26분 
If its the room Im thinking of, you can make a slightly smaller cube that doesnt crash the game if you angle the first block a littel further inwards.
Gameshrk90 2013년 2월 7일 오후 4시 33분 
Thanks everyone
Zorlond 2013년 2월 7일 오후 7시 40분 
Thanks to the alt solution above (thanks, btw), I managed to get to the x-ray room behind it. And found out this...

http://cloud.steampowered.com/ugc/903239780138303006/7594FB78CF12A93CC8D42BBA2C306DF042D13F3F/

http://cloud-2.steampowered.com/ugc/903239780138303491/8B60F17C429174049FB430293AD795A3F00D9D6B/

Yikes. Unless you make it perfect the very first try (and not always even then), and don't create extra bits hanging off here and there, it's internal structure is a total mess. That's a small cube I made, as big as I could safely do without crashing. Imagine that scaled up by the cube law of mathematics.
Zorlond 2013년 2월 7일 오후 7시 48분 
Oh, and BTW, an addition to the Alternate Solution video: If you point straight down and single-click three times, then do a middle-left combo to make a platform, you'll be at just the right height to easily pop cubes in through the holes.
DerfK 2013년 2월 8일 오후 9시 12분 
As an alternate-alternate solution, I used the yellow gun to drag diagonal lines of blocks from the top of one side of the cube to the bottom of the other edge, cutting through the lasers in the middle. It took a lot longer than the alternate solution in the video, though
Durandal 2013년 4월 12일 오전 10시 55분 
Just solved this by stacking 5-6 blocks on the outside to get a view into the whole box through the 2 upper holes that can be fired through, and from 2 angles on each side I was able to fire in and cover every laser. Could have done it with the blue gun.
< >
1-99개 댓글 표시
페이지당 표시 개수: 15 30 50

Antichamber > 일반 토론 > 제목 정보
게시된 날짜: 2013년 2월 4일 오후 10시 31분
게시글: 9